We’re really late, at this rate we won’t get to be on the North Pole in time!
It’s time to make tough decisions. We’ll take a quicker, but much more dangerous road...
First, we need to pull the switch to get on the right track. Switch doesn't seem to be working, let´s check the Station here to see where the problem could be.
Of course, it´s trouble with electric boxes. Once we place them on the correct spot, so that the protruding cables are in line with the cables on the ground, the switch will power on.
Pull the switch and we are ready to go!
Before leaving, you can help the bartender in the tavern, for some experience rewards.
In the basement, replace this pipe and turn these two pipes.
Now we see, why this shortcut is so dangerous. After clearing the snow from the tracks, we have uncovered parts of the tracks that are damaged and cracked.
To avoid these cracks, please guide the train with the help of the switches.
For some extra experience in this part, visit these sauna houses and crank the wheel to let the steam in.
The tracks have been blocked by the landslide. Pull the switch to divert the train.
Another problematic path. Let´s pull the switches and guide the train.
A new problem appeared! Giant slabs of ice are blocking the way. Take the stone, warm it on the spot next to the fire, so it can melt the ice.
With the same stone, do this one more time.
Don´t forget to clear the snow from the tracks as well and we are clear to go.
In the next leg of journey, there are more switches and chunks of ice, that needs to be taken care of.
First, clear the tracks of any snow and other obstacles and get rid of the two iceblocks, blocking your further movement. Remember, you can use one stone to melt the ice, just warm it up next to the fire first.
Then get rid of the last ice block, as we have discovered, that the top tracks are not in a good shape.
Finally, pull the switches so that the tracks are correctly set to avoid any disturbances.
For a closer look, open it here.
Whew, that was exciting!
